Hey guys, brand new to the forum. Ran into an issue and hoping for some help. So, long story short just got a 96 fourtrax 300 fw and it was leaking oil from the right clutch cover. So, I bought a new gasket and put it in and put everything back……. and it would NOT shift at all. So, thinking it was definitely related because it shifted fine before….I pulled the cover again and everything fell out of place. The clutch lever, ball retainer, lifter plate and the lifter cam. Also the bearing behind those and a washer from somewhere. So after multiple tries I put everything back and got it to shift again but now it isn’t right. At first it wouldn’t move in gear so I played with the adjuster and it moves like normal but sometimes the shifter sticks and it doesn’t go into gear as easy as it was before. Did I screw something up when putting everything back? The service manual really didn’t have anything for this or what position everything needed to be in. Do you think just adjusting the clutch adjuster correctly will fix everything? Again it moves fine but doesn’t shift smoothly and sometimes it will randomly act like the clutch is bad and not move until I mess with the adjustment. Sorry that was long but looking for some help. Thanks for anything!!! 🙂

Hi all i am new to da group and live in south louisiana. I have jus gotten a 07 700 grizzly and i cant stand havin an engine brake is there a way to delete the engine brake i know alot of yall are sayin why da hell would you wanna do such a thing its jus my personal prefrence so all help is very mu h apprieciated

I loaded up my atv after spraying weeds at my construction site, when I turned the key on back home, there was nothing, no lights, winch, horn, nothing on the "dash", is there a master fuse somewhere,? put the battery on a charger, went to 100%, still nothing

I just picked up a 2013 Trail Edition 420 for my son and I’m wondering if there is an easy way to get more ground clearance. Is there a simple lift kit?

I just picked up a 2013 Trail Edition 420 for my son and I’m wondering if there is an easy way to get more ground clearance. Is there a simple lift kit?

I have a 2014 High Lifter. Every time I ride in the mud or fast down the roar, my Razor seems to run hot, 220-230 degrees. Just about that time the engine light comes on and the Razor is limited on power or shouts off completely. You can still see threw the top part of the radiator so I know it is not completely blocked off with mud. At times the engine light comes on after the initial over heating issue limiting the power even thought the temp is down below 200 degrees. What is the chance that the design of the cooling system isn’t capable of cooling the 1000 cc engine under heavy riding? Does anyone else have the same issues?

Loosing confidence in my Razor!

I have a 2014 High Lifter. Every time I ride in the mud or fast down the roar, my Razor seems to run hot, 220-230 degrees. Just about that time the engine light comes on and the Razor is limited on power or shouts off completely. You can still see threw the top part of the radiator so I know it is not completely blocked off with mud. At times the engine light comes on after the initial over heating issue limiting the power even thought the temp is down below 200 degrees. What is the chance that the design of the cooling system isn’t capable of cooling the 1000 cc engine under heavy riding? Does anyone else have the same issues?

Loosing confidence in my Razor!

A buddy of mine has a 420 Rancher and was changing the oil when he noticed that a chunk of the threads had broken out of his drain hole. He showed me a picture and it looked like about a third of the threads were missing. He has had his Rancher for a few years and it is way past his warantee period.

Has anybody else ever run into this. He said he checked with some mechanics and they said it was a common problem. I haven’t ever heard of this being a problem.

Another buddy had bought a plug with something that looked like a toggle wall anchor on it the looks like it will work. Has anybody had any experience with this? Is this a long term solution?

The dealership said it would cost $1200 to fix it right and the machine is probably worth $2400.

Wondering if 2013 outlander 650 xmr shocks would work on my 2013 outlander 650 max

Sent from my SGH-I337M using Tapatalk

So I finally installed my clutch kit from jbs today (sheave/16 gram weights/gold spring) I got the slug kit also but never installed that. Installation went smooth. My stock ratio was 2.5:1 roughly after the installation with a 1.1mm shim its a tad over 3.0:1
Now my tires are 28" zillas my stock top speed was 63 mph on a very long straight away would not go any higher and now I hit 61 on a lesser straight away before I ran out of room potential to staying the same 63 if given the same straight away distance which is weird after everything I read you loose top speed with shims so im happy with that. the grizzly definitely rev’s higher in all speeds. In low range the grizzly will wheelie without any rider input if the tires bite the ground just jab the throttle and its almost a gaurantee you got a wheelie it will even do wheelies while at a rolling slow speed. In high it will do it also without rider input but it has to be from a dead stop its more picky on the ground conditions and it either will or wont wheelie. With stock i would be able to wheelies but with rider input and a little obstacle helps out alot.. Im happy with the set-up not so happy that it costed $800, canadian dollar sucks but if i didnt pay i would always be wondering what 3.0:1 feels like with no top speed loss 🙂