Meant to make a post about this a while ago.
For anyone upgrading to axles with bigger cups the steering knuckles need some modification.
You will need to borrow/rent a dremel or cut off tool with an aluminum bit, and remove the 4 nubs and open them up a bit.
The tool removes a lot fast and should take 20min/knuckle, test to fit, make sure cv boots are not rubbing.
For anyone upgrading to axles with bigger cups the steering knuckles need some modification.
You will need to borrow/rent a dremel or cut off tool with an aluminum bit, and remove the 4 nubs and open them up a bit.
The tool removes a lot fast and should take 20min/knuckle, test to fit, make sure cv boots are not rubbing.
PS makes a big mess, so throw some drop sheets down first.
