My girlfriend bought a 570 xmr back in September. Since she got it the handling has been a little disappointing, first the biggest problem is very tippy when off camber especially when you go slow. The other issue is the machine can’t make a circle to save it’s life. The only time it will turn is on dry pavement but even still it feels likee iit’s pushing.

I noticed how tippy it was yesterday, trying to turn around on a slight hill kept lifting the uphill wheel and didn’t give any confidence no matter how I leaned. Same when trying to crawl over a 6" log again on a very slight hill. I backed up and hit the log slightly above walking speed and you barely knew it was there.

I went one click higher on the preload in the rear to see if that makes a difference and after reading I’m wondering if I should do a small pipe lift.

When we first got the machine I ended up disconnecting the rear sway bar to help with some of the rear tire lift when turning on flat ground and let the machine stay flat over slower obstacles. That helped a lot but it still needs work.

The other options I might try are wheel spacers or different tires from the mudzillas

I know the xmr won’t ride like my renegade but it’s scary anytime you have one wheel more than 6" higher or lower than the opposite side