2009 Can Am Renegade 800 – Warn Winch
Well, last time I rode I was having issues with my winch making the low battery light come one so I went and got a new battery and put it in thinking that it was the issue. Today, same issue again and again. After reading many posts people say to run it at 4k while winching due to the computer thinking its drawing too much power and cannot charge at low rpms. While running high rpms it would still do it today. I have read several posts and some people suggested hot wiring the in-out switch direct to the battery? How would I go about doing this, since the wire for the key on power is very small. Currently I have it wired to 12v under the key. Any other suggestions would be appreciated, I’d just rather not have the light come on all the time since I tend to get stuck a lot…