Wheel Spacer Woes

  • Well, I went cheap and bought 1.5" ebay wheel spacers and now I am paying for it with frustration.
  • First off these things are pretty heavy but decided I would put them on anyway.
  • The problem I am having is the holes in the spacers are considerably bigger then the wheel studs allowing at least 1/8" movement up and down, fore and aft, if not more. The nuts are flanged as opposed to cone shaped and there is no chamfer in the spacer to accept cone shaped nuts.
  • In other words there is no way to center these things on the hubs.
  • I have spent most of the morning trying to come up with a sleeve of sorts to go around the studs and in the spacer to get a more centered fit. No luck so far.

Any suggestions?