I was going over my 2014 570 that has 1000 miles and about 80 hors on it and noted slop in the rear wheel bearings that was a bit more than I was expecting. Measuring at the o.d. of the 25 inch tire there is about .040-.050" of play. I can’t feel any roughness in them when I turn them. They are properly torqued and both rear wheels are about the same. There is also slop in the front wheels but slightly less. It felt like a mile but only measured .040-.050. I checked my 2012 570 with about 1700 miles and its wheels are noticeably tighter.
The machine has never been in mud bogs and very few water crossings that have been above the hub.
The machine has never been in mud bogs and very few water crossings that have been above the hub.
How much play is normal/acceptable in these machines?
Thanks.