Read just about every thread. Seen all the you tube videos. Tried pb blaster(soaked for days), hammering, heating,etc. It is NOT coming out and won’t turn.
I have a porter cable grinder and put a4" cutting disc on it. I also have a air powered cut off tool from harbor freight (central pneumatic I think). That has a 3" disc on it. I removed the shock and took the2 bolts out that let the rear part of the frame fold up for more access. No matter what I try it seems like there is no clearance. The body of tyre tool is hitting the quad or the cutting action will go into the case or swingarm. Same with a reciprocating saw ( not enough clearance). I’m almost through but if I keep going , I’ll cut into the swingarm or case. .any help would be appreciated. Thanks
I have a porter cable grinder and put a4" cutting disc on it. I also have a air powered cut off tool from harbor freight (central pneumatic I think). That has a 3" disc on it. I removed the shock and took the2 bolts out that let the rear part of the frame fold up for more access. No matter what I try it seems like there is no clearance. The body of tyre tool is hitting the quad or the cutting action will go into the case or swingarm. Same with a reciprocating saw ( not enough clearance). I’m almost through but if I keep going , I’ll cut into the swingarm or case. .any help would be appreciated. Thanks
