So to start off this tale i thought i would give a back story as to why I am going boosted. I lost my original 900 engine due to movement in the tranny coupler breaking off the pcv off the valve cover. Due to this i lost oil and ingested dirt all with in 10 miles and seized a rod bearing.
Next thing was to search for a new engine and i ran across a good fellow forum member and bought his engine that was ready for boost cheaper than i could put together with a good engine and adding all the parts(9:1 piston, arp head studs, valve train done, manual tensioner). Also purchased from the same member I got stm rage 6 clutches and aerocharger intake with pump and cooler.
I then proceeded to procure a turbo Kit from another forum member. This was a Hansen turbo kit with a pcv with a map sensor, auto tune, and lcd-200.
Beyond these parts I purchased a donaldson intake, oil cooler with fan, larger radiator.
I have slight modified the exhaust of the hansen kit so to be able to use the aerocharger intake. I also modified the aerocharger intake.
Next thing was to search for a new engine and i ran across a good fellow forum member and bought his engine that was ready for boost cheaper than i could put together with a good engine and adding all the parts(9:1 piston, arp head studs, valve train done, manual tensioner). Also purchased from the same member I got stm rage 6 clutches and aerocharger intake with pump and cooler.
I then proceeded to procure a turbo Kit from another forum member. This was a Hansen turbo kit with a pcv with a map sensor, auto tune, and lcd-200.
Beyond these parts I purchased a donaldson intake, oil cooler with fan, larger radiator.
I have slight modified the exhaust of the hansen kit so to be able to use the aerocharger intake. I also modified the aerocharger intake.
This has all been a slow going process as i got side tracked fixing an ACE for momma and dealing with all 5 of my kids. I will finish this project but it will be slow going as i have had to also purchase a larger vehicle for momma to haul all the kids, due to having a 2 month old now. So please bear with me as I proceed with this project.:ride: