Last Summer I installed the lift with front axles and had binding issued. I gained 4" in the front from the lift, so i removed the front plate. Everything seem to run ok. But i noticed a cut on the inner boot this spring. Changed the axle
Blew a rear axles this summer so i installed the rear Rhinos. Blew a axles on the first ride but superatv warranteed it. Superatv asked what my angle were on my axles. I email back with 35° in the rear and 33° in the front with my smaller plates, they didnt recomment i run with those angles and i would keep destroying axles.
I removed my lift and tryed to get a refund since I this viewed this as a product defect. They wouldnt help me. When i removed the lift i noticed another front inner boot had a cut in it. Installed a new Rhino and 2 weeks later the one i changed in the spring had a cut in it.
Im attaching pictures of the 3 axles with boot issues. They are all simular so i tryed to get SuperAtv to replace them with no luck. Their products arent well made and lift arent designed properly.
My bike is 2014 with around 700miles on it.
