I went out to start it this weekend, I turned the key on and cranked it, it can be finicky sometimes when it hasn’t been started in a while. So it didn’t crank up but it tried to, but sputtered out. So, I went to crank it again and noticed my display showed nothing. So I turned the key off and back on again and still had nothing, the machine is completely dead, battery is fully charged, I pulled the front cover, no fuses blew. It’s almost like something got too much voltage and a breaker blew. I looked in the service manual but it appears the only circuit breaker our machines have is for protection for the fan switch. I’m stumped, am I missing something? Is there another circuit that is protected by a breaker or fuse? Does the ignition circuit have something to keep it from being overloaded? That is the only explanation, because it went from cranking and starting to nothing so something popped just not sure what.