I’m new to your forum and could use a bit of advice.
Bought a used 2009 Razor in May 2015. On first outing, my son’s friend thought it was a bulldozer… or at least that was the result. As he drifted it around the trail corner, he over-corrected, hit a fallen log, which launched the machine into a (thankfully) dead stump. The driver’s side tire took the shot about two feet above ground and dislodged a 30" dead stump. Tie rod/steering, a-arm toast. I got to operate it about 25 minutes…
So, now 6 months later, want to take it hunting and it will not even turn over. I get a click at the solenoid. Had batter checked, 14v, full 310 CCA. Emery clothed and tighten the cables and connections at +/- terminals of battery, terminal ground location and ground cable bolt on starter. Changed the solenoid. Still nothing but a single click at keyed ignition location.
I did the blink code deal, brake on, key to "ON" 3 times in 5 seconds, leaving it on third time… get code 51, which manual indicates as;
Injector 1 – Open Load
Injector 1 – Short circuit to ground
Injector 1 – Short circuit to battery
Again, the "terminal ground" behind battery on frame, I cleaned cable ends, emery clothed metal, tightened???
The machine looks like the skeleton of terminator as I’ve disassembled half the body searching for a broken wire…
HELP please…
PS… I have a service manual but it does not point me in a direction… only tells me what the code is… totally frustrated!!!
