I’ve read a lot of these posts today about how to wire up extra lights but I still have some questions.
I was thinking of wiring from the power wire of the winch or the acc. plug because it would only be powered when the key is on. I would connect from there and place an inline fuse and then connect to the switch. The switch is a 30amp lighted switch. From there I would run to my LED light. I would run a ground wire from the light to the switch and to the negative side of the battery. Does this sound correct? I don’t think there is a need to use a relay for one LED light with a 30amp switch. I do not want to connect this light through my high/ low beam switch. Any advice or step by step instructions would be great. I’d hate to burn up my brand new Grizzly!!