When I start my scrambler, sometimes it gives the stuck throttle code and throws the check engine light on. Code is 520194-7. I’ve never had it do this before, but now it seems to be doing it more and more lately. I recently changed the throttle housing because my thumb throttle got hit by a rock and broke off. Then parked the quad for a few months and the first ride it did it once, next ride a couple more times then the last ride it was doing it the entire way home any time it would engine break, the motor would cut out and the check engine light would come on. If I hit the throttle twice it goes away. I took it apart and checked the play in the throttle and cleaned the contacts in the sensor inside the throttle as well as opened the throttle body and sprayed some carb cleaner in it. The throttle didn’t appear to be sticking at all when I tested it. The problem is that it’s so hard to test if it’s fixed because sometimes it doesn’t do it until 45 min into the ride. Any other suggestions of what I can replace or check to just get it fixed so I don’t have to deal with this every ride. And no I don’t just want to bypass the switch. I want it fixed, not rigged up.