I have a 2014 RZR 800 XC. Both rear tires have about 1/8 inch of play. The upper and lower outer hub bushings are a little loose. The bushings seem to only have about .030 looseness, but when multiplied by the diameter of the tires, it’s about 1/8 inch. Would you be concerned with this? I don’t like it, but I also don’t like spending several hundred dollars for new bushings, not knowing if all of the play will disappear. I found Delrin bushings at UTV Inc. Says they fit an 800, BUT will they fit an XC? Do those bushings replace all of the original parts, including the original steel sleeves? There’s play from the bolts to the steel sleeves, AND from the sleeves to the plastic bushings. I would think that there should be no play whatsoever. Anyone know? Ted