I’m working on this rancher and not sure what to replace, the speedo/odo doesn’t work, while riding it’ll get stuck in a gear so you have to turn off/on to shift again, other than that it runs and shifts perfect.

Angle sensor tested good, speed sensor tested good (0-5v @pink wire), pink wire to meter and ECU tested good, swapped ECU and still the same, power and ground tested meter was good. Only thing I’ve found is black/blue wire at speed plug and at meter plug only have 0.881v instead of 12v. That wire only runs to 3 pin and meter 14 pin, so clueless what else to check. Also serviced the es gears.

So can the meter be bad causing the shift and display problem?