Recently I had a lower heim joint break on my Alba high clearance radius rods at the dunes. I was going over some whoops and by the time I got stopped the tire was laid on it’s side pretty far. So now I am repairing the damage and I know the trailing arm got bent up close to the pivot. I have a spare pair of trailing arms I bought a couple years ago but after looking at them they have a slight crook in the pivot area also. I laid them down side by side and measured and my original has about 10degrees side bend and the spare has about 5 degrees of side bend. I know my original is definitely bent but is my spare bent or is that about normal?