Dear members,
I know you might be fed up with one and the same posts, however, believe me I have searched, researched and looked everywhere to solve a stupid discomforting problem with my headlights.
the problem: when I turn the quad with lights on, and use the low/high beam switch my lights work individually but not together when on hi.
Standart problem, right, but not that much because:
1. I checked the switch inside for meltdowns or anything wrong, NOTHING everything looks brand new, the springs are there, and all the small connectors move freely.
I know you might be fed up with one and the same posts, however, believe me I have searched, researched and looked everywhere to solve a stupid discomforting problem with my headlights.
the problem: when I turn the quad with lights on, and use the low/high beam switch my lights work individually but not together when on hi.
Standart problem, right, but not that much because:
1. I checked the switch inside for meltdowns or anything wrong, NOTHING everything looks brand new, the springs are there, and all the small connectors move freely.
2. checked fuses – they are perfect, but just to be on the safe side I changed them with brand new ones
3. Checked the relays – nothing wrong there too, I even switched them around and everything else works perfectly.
4. Checked the wiring – everything seems fine…
I have no clue…I need both low and hi to run simultaneously since I ride a lot in the dark.
The only new thing I did to the quad before this happened, was to connect my LinQ rear storage light to the accessories plug on the right side under the seat.
:th_smiliefrustrated :th_smiliepullhair: :th_smiliefrustrated :th_smiliepullhair:
