hello,Im having trouble finding a drive clutch i can use on my 2005 sportsman 800.The original is NLA,i found a 1322555 from a 2006 is supposed to work but is back odered from polaris.(been waiting 2weeks already).Im hoping a 1322673 from a 2007 will work. thank you

I have a 86 350 fourtrax. Having trouble with the fuel pump.? Any help? Is it on all the time or just periodically? Is there a fuel relay or something? Please help!

I have a 86 350 fourtrax. Having trouble with the fuel pump.? Any help? Is it on all the time or just periodically? Is there a fuel relay or something? Please help!

Anybody have a recommendation for someone that is good on rebuilding the transmission on a 1998 Magnum. Having very little luck finding one in good shape. Just my luck.

Anyone run elkas with a lift kit ? The machine i have came with a lift kit and i just got my elkas. I know on my rzr the lift made a huge difference on the shocks and i ended up taking it off. Thinking of doing the same with the outlander … . thoughts ??

Anyone run elkas with a lift kit ? The machine i have came with a lift kit and i just got my elkas. I know on my rzr the lift made a huge difference on the shocks and i ended up taking it off. Thinking of doing the same with the outlander … . thoughts ??

Hello everyone . I am running a 2 inch high lifter kit with 28 bighorns but just bought a set of elka shocks. I want to remove the lift kit but not sure if the 28’s will still fit. Anyone running 28’s on a stock machine without a lift or with elka’s ?

thanks

Hello everyone . I am running a 2 inch high lifter kit with 28 bighorns but just bought a set of elka shocks. I want to remove the lift kit but not sure if the 28’s will still fit. Anyone running 28’s on a stock machine without a lift or with elka’s ?

thanks

So I get a new Foreman, which I love by the way, and I load it in the back of the truck. The bumper sticks out past the front wheels and is even with my trucks back glass.

My truck has some D loops bolted to the bottom of the truck bed by the tailgate.

So, I take a strap and run it through the D loop at the back of the bed and through the front rim of the Foreman. I did this in case I hit my brakes hard, it would keep it from rolling forward.

I get it home and take off the straps and place the ramps on the tail gate. I roll it down the ramp by hand off the back of the truck and as it is rolling about half way down the ramp….boom.

The Foreman stops in its track. I took off all the straps but the one wrapped around the front rim and the D loop next to the tailgate.

Would an abrupt stop like that be enough to cause the A-arms or tie rods to bend, or possibly bend the frame mounts?

What should I be looking for if there is any signs of damage, or should I even worry about what I did bending anything?

Thanks

So I get a new Foreman, which I love by the way, and I load it in the back of the truck. The bumper sticks out past the front wheels and is even with my trucks back glass.

My truck has some D loops bolted to the bottom of the truck bed by the tailgate.

So, I take a strap and run it through the D loop at the back of the bed and through the front rim of the Foreman. I did this in case I hit my brakes hard, it would keep it from rolling forward.

I get it home and take off the straps and place the ramps on the tail gate. I roll it down the ramp by hand off the back of the truck and as it is rolling about half way down the ramp….boom.

The Foreman stops in its track. I took off all the straps but the one wrapped around the front rim and the D loop next to the tailgate.

Would an abrupt stop like that be enough to cause the A-arms or tie rods to bend, or possibly bend the frame mounts?

What should I be looking for if there is any signs of damage, or should I even worry about what I did bending anything?

Thanks