Hi All,
So, I replaced a battery and a starter relay on my Kodiak. When I turn the key there is power(display, lights etc.) However, when I press the starter button, nothing- no clicking- nothing.
When I jump the relay it turns over, however. It can’t be the relay as it was the exact same before I replaced it. Any suggestions? I have a voltmeter, also.
I noticed my four trax 4×4 300 1992 the right front wheel wheel wasn’t straight . I looked under it and something is broke on the suspension frame . Maybe control arm ? Can someone tell me what I needed? See attached.
When starting with motor cold it fires right up but instantly dies hit the start again and fires up and stays running,only happens on cold motor, my 07 never had this problem,anyone else having this problem?
When starting with motor cold it fires right up but instantly dies hit the start again and fires up and stays running,only happens on cold motor, my 07 never had this problem,anyone else having this problem?
Anyone know if Quadboss 560823 tire chains will fit my 94 Polaris 400L? My tire sizes are F-25x8x12 and R-25x12x10 I tried to find info on the internet with no luck.
Just bought a new 2017 Sportsman 450 to go hunting. I’m new to it all, was looking to buy used but after viewing you tube decided against it. Wasn’t really a fan of buying something that has been submerged in mud or water. I’m an elderly gent who is an avid deer hunter and sick and tired of dragging deer through the woods back to the truck.
It’s equipped with 2,500 winch, front and rear extender racks, Front and rear bumpers, hand guards, Polaris Scabbard Mount and Scabbard case.
Ok I am pretty handy with most things and I hate to pay the Dealer to hookup my rear seat hand warmers. I have a 2015 570 sportsman touring bike and added a rear box storage unit with rear hand warmers for the wife. I has a brake light also mounted at the top of the box. Four wires from the box- ground- parking- tail light- warmers. I cannot find any where that I can get the brake and parking light picked on the Polaris. and help is appreciated and pictures are even better.
Hello,
recently purchased a 2016 Outty 570 and put a passenger seat on for the wife. She hates that her legs hang down. does anyone have these? MORE PICTURES – 2-UP FOOTRESTS
Also I am thinking about buying the CAn Am linkQ speaker box. They are around $500. I hate to spend the money if its junk. Is anyone using this that can give a review?
2002 grizzly 660. I’ve owned the beast for about a year and the 4×4/diff lock wasn’t working when I bought it. I’m just now getting around to fixing it and having some issues. I got the 4×4 to work by replacing the motor inside the servo. ( I am not electrically savvy whatsoever so sorry if I’m not using the correct lingo). It bench tested fine using the 2 c batteries. Installed the servo back on the diff and will now go into 2 or 4 wheel drive just fine. When I turn on the diff lock the light on the cluster blinks but never engages or makes any noise. Before reinstalling the servo, I made sure the rack gear that moves the fork slid freely side to side. Not sure where to go next, any help is appreciated.
2002 grizzly 660. I’ve owned the beast for about a year and the 4×4/diff lock wasn’t working when I bought it. I’m just now getting around to fixing it and having some issues. I got the 4×4 to work by replacing the motor inside the servo. ( I am not electrically savvy whatsoever so sorry if I’m not using the correct lingo). It bench tested fine using the 2 c batteries. Installed the servo back on the diff and will now go into 2 or 4 wheel drive just fine. When I turn on the diff lock the light on the cluster blinks but never engages or makes any noise. Before reinstalling the servo, I made sure the rack gear that moves the fork slid freely side to side. Not sure where to go next, any help is appreciated.
