Just bought a non running 02′ Scrambler 50. Picked it up for $250. Hopefully that is a steal. I am having a hard time locating replacement parts and repair information. Any info on this thing would be great. Are repair manuals available? Found a few parts on amazon like, carb, starter, stator and starter relay. All balls has limited parts. Hoping to get this thing running by X-Mas for the little ones.

Hey guys, I was hoping someone on here could give me some advice. I recently bought a used 2014 TRX90 for my son and plan to give it to him at Christmas. The thing is in awesome shape, but the previous owner let it sit for about 7 months, and it has idle issues, etc. I suspect the carb is gummed up pretty bad.

I have a rebuild kit I’ll be going over it with this week, and I’m hoping that will solve the problems, although I don’t mind purchasing a new carb if I have to. Only problem is the OEM carb for this model is out of stock everywhere I have looked. I’ve had one on backorder through Motosport.com for well over a month.

They do, however, have a carb in stock for the 2012 and older models. The part numbers are different, but I thought the carbs on these were pretty much the same dating years back? Can anyone tell me for certain if a carb from a 2012 will bolt right up to a 2014?

I’m trying to get this thing running like a top before Christmas.

Thanks!!

I am trying to get a good photo of the underside of the dash on a 2013 Polaris Ranger 800. One of these was involved in a fire and we are trying to eliminate the wiring under the dash as a possible cause. We will pay for your time to take a photo and send it to us. Please give Don a call at Talbott Associates Inc.
Toll free 1 888-256-3852
Thanks for checking out my post.

I am trying to get a good photo of the underside of the dash on a 2013 Polaris Ranger 800. One of these was involved in a fire and we are trying to eliminate the wiring under the dash as a possible cause. We will pay for your time to take a photo and send it to us. Please give Don a call at Talbott Associates Inc.
Toll free 1 888-256-3852
Thanks for checking out my post.

I have a 2017 Rubicon model# TRX500FA 6H
Can anybody provide the part number for the Oil filter?

Thanks
Todd

Hi, I hope someone can’t help me out. I have a 300 fourtrax that only starts when you use the kick. I get one spark then no spark till I let off switch. I’m guessing it has something to do with stator, but not sure!

Hi, I am new to the forum. I just bought a 2006 Outlaw that is having some issues. One of them is a loud knocking coming from high on the engine. When I first start it, everything sounds normal, but if I rev it to higher RPM’s the knocking will start and continue while the quad is running even at idle. The knock is loudest on the cam chain side high up at the cams. Someone told me the valves may need adjusted (but it starts easy). I am looking for opinions on what this may be and I am leaning toward the cam chain needs to be replaced???

looking for help…

thanks!

Hi, I am new to the forum. I just bought a 2006 Outlaw that is having some issues. One of them is a loud knocking coming from high on the engine. When I first start it, everything sounds normal, but if I rev it to higher RPM’s the knocking will start and continue while the quad is running even at idle. The knock is loudest on the cam chain side high up at the cams. Someone told me the valves may need adjusted (but it starts easy). I am looking for opinions on what this may be and I am leaning toward the cam chain needs to be replaced???

looking for help…

thanks!

Guys,
How much of a strain will the 66" poly plow, frame, mount, etc. put on the front
end suspension of my 2016 Sportsman SP? Should I be concerned with replacing
the front springs to the HD ones right now, can it wait until spring time, or should I not be concerned at all? Any thoughts?

Thank you.

Nick B.

Guys,
How much of a strain will the 66" poly plow, frame, mount, etc. put on the front
end suspension of my 2016 Sportsman SP? Should I be concerned with replacing
the front springs to the HD ones right now, can it wait until spring time, or should I not be concerned at all? Any thoughts?

Thank you.

Nick B.