Basically got a stock 400 , plan on running 27" maybe 28" tires.. mega mehems. Just wondering if I’ll need a gear reduction? And basically can you tell me all the good mods that help with power etc.

Picked this up at fleet farm on sale for 40 bucks ,very light.

Attached Thumbnails

 

Picked this up at fleet farm on sale for 40 bucks ,very light.

Attached Thumbnails

 

Does anyone here run AMS slingshots? Looking for some info on how well they are holding up and performing. I just installed 27’s on my 850 they run about half inch short at 5 psi. I have only about 30 km on them…so the verdict isnt in on them yet but so far they seem great and are not that heavy.

Anyone know what could be the issue with my tail lights not working? Checked all the fuses, checked the bulbs, I also changed the bulbs, and nothing. No running lights, no brake lights. I can hear the clicking when I press the handbrake and the footbrake, lights just don’t work. It’s a 2016 Outty Xmr 850.

Sent from my iPhone using Tapatalk

This is my first post, i am new to forum. Love it so far. I have a 2007 sportsman 800. I got a 12" LED light bar. Does anyone have any suggestions on where to mount it, or show me where they have theirs. I do not want to put it on top box, I do not really want to block winch location (no winch yet but thats next purchase). Any help on this would be much appreciated. Also, I am fairly knowledgeable with electrical, but not in the ATV world. I bought a wiring harness with relay. Is there anything recommended other than wiring directly to the battery?

This is my first post, i am new to forum. Love it so far. I have a 2007 sportsman 800. I got a 12" LED light bar. Does anyone have any suggestions on where to mount it, or show me where they have theirs. I do not want to put it on top box, I do not really want to block winch location (no winch yet but thats next purchase). Any help on this would be much appreciated. Also, I am fairly knowledgeable with electrical, but not in the ATV world. I bought a wiring harness with relay. Is there anything recommended other than wiring directly to the battery?

When I took the front fender cover off my recently acquired 2002 Grizzly 660, (to make sure there were no mouse nests in the Ultramatic air intake), I found that the previous owner had cut about a two inch hole in each corner of the fenders (inside the air chamber, one right next to the radiator cap, and the other in the opposite corner. The one next to the rad. cap is not nearly big enough to get the cap off through it. Any ideas why a meticulous guy (he was a Pharmacist) would have cut those holes?

Attached Thumbnails

 

 

Hello, I need new case halves for my 2002 scrambler 400 and I found a 98 sport 400l case halves. Will these work?

Hello, I need new case halves for my 2002 scrambler 400 and I found a 98 sport 400l case halves. Will these work?