I am trying to diagnose a clunking/popping sound coming from the front transfer case area on my 95 fourtrax fw. I have already gone through the front diff and ruled it out, Im not sure what else it could be. I took the transfer case apart and the only issue I see is the bearings have a little bit of slack in them. Has anyone had any luck replacing these or should I just replace the whole thing? I a little slack enough to worry about or should I just clean it up and put it back on?
New guy here… have been reading these forus for months now and learned a great deal in the process and for that I thank you… 2 weeks ago I purchased a used 2010 850 touring eps that needed some work but overall was in very good shape… I pulled the lower right side black plastic exhaust cover cuz I could smell something getting hot and found my plastic side panel had burned through the heat shield and started to melt the plastic.. The temp here now is -3 degrees C and it took a whole 4 mins for my header to start glowing red about 3 inches back from the head. Any ideas on how to remedy this?? Pulled the two plugs and they were both a little sooty looking seeming to indicate a rich mixture. Machine is EFI. Not a plugged exhaust cuz I removed the muffler with no improvement and even tried a new air filter… please any ideas greatly appreciated! Sorry for long post..
Bailey here from Baja Designs – The Scientists of Lighting in San Marcos, CA.
We are very excited to become a part of the Can-Am Forum. We are just getting setup as a Vendor so stay tuned for more information. We will also be offering a 10% Forum Discount. :yahoo:
Bailey here from Baja Designs – The Scientists of Lighting in San Marcos, CA.
We are very excited to become a part of the Can-Am Forum. We are just getting setup as a Vendor so stay tuned for more information. We will also be offering a 10% Forum Discount. :yahoo:
Anyone worked with this?
Its wired up with the gear shifter. Work as a parking brake..
Mine dont work any good. Made the park shift hard,so i took the wire off, and made it mutch better.
Anyone worked with this?
Its wired up with the gear shifter. Work as a parking brake..
Mine dont work any good. Made the park shift hard,so i took the wire off, and made it mutch better.
.jpg)
