I just got the 400 running and took it out for its first run. The main problem is it will only change gears with the engine off. Just grinding noise while running. It shifts fine with engine off, sloppy but shifts. Is the problem with the shifter or the secondary drive? or are the shifter forks gone? Plenty of power in high and will stay still at idle

Attached Thumbnails

 

I just got the 400 running and took it out for its first run. The main problem is it will only change gears with the engine off. Just grinding noise while running. It shifts fine with engine off, sloppy but shifts. Is the problem with the shifter or the secondary drive? or are the shifter forks gone? Plenty of power in high and will stay still at idle

Attached Thumbnails

 

Hi there , friend has a rancher AT 420 that his wife uses around their farm, I’m no pro but he got a new one instead of attempting to fix and wants to sell me this one at a reasonable price that I can afford .

So the bike was parked up for a few months in his garage and it cranks and starts perfectly but when you Press the drive selector buttons ( up or down ) into drive or reverse nothing happens , there’s just a horizontal line on the screen " —- ". Does anyone know how to fix this ?

Hi there , friend has a rancher AT 420 that his wife uses around their farm, I’m no pro but he got a new one instead of attempting to fix and wants to sell me this one at a reasonable price that I can afford .

So the bike was parked up for a few months in his garage and it cranks and starts perfectly but when you Press the drive selector buttons ( up or down ) into drive or reverse nothing happens , there’s just a horizontal line on the screen " —- ". Does anyone know how to fix this ?

I sunk my 2016 Renegade Xmr this summer, done all necessary maintenance to get bike back running and its been running perfect ever since and still is! But i started to think about the cold weather now 0-10c here in Newfoundland,CA would it have any effect on the bike where it have been sunk? things freezing up is my main concern. nothing has happened as of yet but its stuck in my mind

I sunk my 2016 Renegade Xmr this summer, done all necessary maintenance to get bike back running and its been running perfect ever since and still is! But i started to think about the cold weather now 0-10c here in Newfoundland,CA would it have any effect on the bike where it have been sunk? things freezing up is my main concern. nothing has happened as of yet but its stuck in my mind

I am in the process of changing the axle bearings on my 02 scrambler but the bearings I bought are regular ball bearings not the cone shaped ones that came out, can these be used if I remove the race? and how would I remove it?

2010 800r
What’s the trick to removing the clutch rollers? Both ends of the pin are the same size and there are no clips. There are little arrows but I’m unsure what they indicate. Do I just tap them out? Sorry I do not have the manual

2010 800r
What’s the trick to removing the clutch rollers? Both ends of the pin are the same size and there are no clips. There are little arrows but I’m unsure what they indicate. Do I just tap them out? Sorry I do not have the manual

Please contact me if you have a front rack extender that fits a Polaris Hawkeye

Sent from my iPhone using Tapatalk