I,ve got 350es rancher and everything has stop working the bat is charged up but I have no power going to the switch have checked wiring couldn’t fine anything wrong with it was riding and it shut off pulled started it and use manual shifted it to get home

Is there a place to get new lower shock bushings? I seem to be able to wear them out! I have found the uppers but no lower. Yamaha wants you to replace the whole shock, which doesn’t make sense to me!

2008 outlander 650 quits once in awhile when using my winch and displays communication failure. It will start back up but I have to keep on the throttle for 10 seconds to keep it running or else it will die out. It’s also been bogging and backfiring intermittently when accelerating. Battery and all connections perfect! I added a 800 cca battery to it with no change. Both problems started the same time. I checked fuel pressure and it was 51 psi and it doesn’t drop under load. I pumped out the fuel, added fresh gas and injector cleaner with no change. There is no voltage drop on ECM power wires and grounds are good.

I can’t shift gears but this peice is broken off i cant find what its called.

Help please

I believe the year is from 1991 -1993

Attached Thumbnails

 

 

Hi guys. I’m new to this forum. I’ve browsed many threads and so much helpful information. I just purchased a used 2011 Sportsman 500 ho 🙂

I do have one request. Does anyone have instructions for the glacier pro plow mount for part # 2879633. I can’t seem to figure out where one spring goes. Thank you. Matt

Hi all.

I just changed the cam chain in my ’96 Fourtrax 300 2×4, put everything inside the clutch cover back together, and installed the cover. Before I put the rocker box back on, and before I filled it with oil, I wanted to check to make sure the kick starter and everything else inside the cover was working; however, when I pushed on the kick starter, it seems only to free wheel the clutches, but not the crankshaft (which is what I saw it doing before I replaced the cover). My question is, do I have to also fill it with oil, and put the rocker box back on before the kick starter will work, or should I stop where I am, take the cover off, and look around? I’m sure I put everything back together correctly, so I’m not sure what the issue is unless this is normal given I haven’t completed the job just yet.

Thanks.

Probably been asked and answered a million times but what are you guys using especially in the dunes.. Thanks Jerry

I have a 1982 skidoo citation SS that of course right at the start of the season messed up a piston. I have all the parts to rebuild it but I can’t get either of the cylinders off, hitting with rubber mallet led to two broken cooling fins ( also need advice on how to fix) . The main thing is getting the cylinders off though… Thanks in advance.

My 2004 Sportsman 400 was in a small role over. No real damage but I need new upper and lower dash plastic pieces. What models and years are compatible with my 04 Sportsman 400?

Sent from my iPhone using Tapatalk

I’m going to get my Trx 300 tank powder coated and want to replace the decals at the same time.
Where is the best place to buy new decals from?
I’m not in US so will have to get them sent to New Zealand.

Here is what I want to match.

If someone could help me out please.

Attached Thumbnails