Looking to replace stock tires on my stock 2016 grizzly 700 and stock 2016 kodiak 700 looking at putting 28" mega mayhems on the grizz and 27" mega mayhems on the Kodiak. My question is is anybody running these tires on stock machines and if so how much of a power loss due to the extra weight. Also goes the stock rim weights compare to the itp steelies weights. I like the look of the itp steel wheels. Thanks for any input.

Anyone try their gaskets? Seems an inexpensive way to go compared to some other lid replacements.

Folks, it’s been a while since I was on here last. My 2010 550 eps unit has shat the bed. I spliced in a new relay to no avail. Electrical tests with the multimeter show power. My dealer is worthless and wants me to drop off my wheeler for 4+ weeks just to reflash the eps unit. As I use my wheeler almost daily around the house and the occasional ride, dropping it off for a month is not happening. I’ll be making the two hour drive to another dealer when time permits. I’m looking at the worst case and thinking I need a new unit. Im surprised my dealer can even spell Polaris without looking up, I won’t ask them anything questions. My question, what years and machines power steering units cross over to the 2010 sportsman xp? Anyone have compatible eps model numbers handy? 2413038 is the "new" part number cycleparts has listed. I’ll never pay msrp for a new one so I’m be looking on eBay I guess.
Thanks in advance

Folks, it’s been a while since I was on here last. My 2010 550 eps unit has shat the bed. I spliced in a new relay to no avail. Electrical tests with the multimeter show power. My dealer is worthless and wants me to drop off my wheeler for 4+ weeks just to reflash the eps unit. As I use my wheeler almost daily around the house and the occasional ride, dropping it off for a month is not happening. I’ll be making the two hour drive to another dealer when time permits. I’m looking at the worst case and thinking I need a new unit. Im surprised my dealer can even spell Polaris without looking up, I won’t ask them anything questions. My question, what years and machines power steering units cross over to the 2010 sportsman xp? Anyone have compatible eps model numbers handy? 2413038 is the "new" part number cycleparts has listed. I’ll never pay msrp for a new one so I’m be looking on eBay I guess.
Thanks in advance

I have a 500 atp, bought it used from a friend, ran it all summer, brought it with me to california. Used it a few times, but now the last couple of times it stopped idling, over heat symbol came on. Thought maybe cause it had sat for a month maybe the thermostat had stuck closed, took it out and no difference. ordered and replaced the water pump and accessaries and replaced no difference. Fan comes on and stays on, to point where it kills the battery. thinking maybe sensor is stuck in hot mode, hence signalling engine is hot and tells fan to run???

Help!!
Medic1960

I have a 500 atp, bought it used from a friend, ran it all summer, brought it with me to california. Used it a few times, but now the last couple of times it stopped idling, over heat symbol came on. Thought maybe cause it had sat for a month maybe the thermostat had stuck closed, took it out and no difference. ordered and replaced the water pump and accessaries and replaced no difference. Fan comes on and stays on, to point where it kills the battery. thinking maybe sensor is stuck in hot mode, hence signalling engine is hot and tells fan to run???

Help!!
Medic1960

2013 Renegade 1000 xxc with 2500 miles, payed $6500 out the door. Has Two Brothers exhaust, power commander, full skid plates, rear rack and a winch. Downside is that it does not have the beadlock wheels and it needs tires pretty badly.

Hi. I was wondering if the bottom end of an 05 Outlaw would work on an 03 Predator 500. I mean the flywheel and the stator stuff mainly, but what about the transmission? If it would, how would I do that? Thanks for your help!!

Hi. I was wondering if the bottom end of an 05 Outlaw would work on an 03 Predator 500. I mean the flywheel and the stator stuff mainly, but what about the transmission? If it would, how would I do that? Thanks for your help!!

Parts are from 1995 polaris scrambler 400 4×4 atv may fit others

Have all parts pictured
body isn’t bolted on that’s why it’s sideways
Has bad frame and needs top end rebuilt
Let me know what parts you need

Attached Thumbnails