Hi guys I’m new to this site and was wonder about putting on some 30/10r14 tirea on my can am renegade 800 any ideas will I have to lift it or shave the fenders ? Any help would be appreciated.. thanks alot looks like a knowledgeable site and I’m glad to be a member

Hey I have 2010 Polaris sportsman 800 and the rear wheels have a lot of camber there both pointed inwards. I have checked all the bearings there is no play in it. I bought the atv with tracks is it possible that the shocks could be fully adjusted causing this?
Any help would be much appreciated thanks

Just wondering if I missed something, I haven’t had to lube yet but just getting use to machine it’s a 2017 Polaris Sportsman Sage Green 450 with a 500cc engine AWD.

I found 2 fittings in the front and 6 on the rear have I missed anything?
My manual shows a fitting in the front drive shaft but have been unable to locate.:dunno:

Thanks for any info I plan to do my own routine maintenance for example Oil and Fluid Change just purchased K&N Air filter.:shakehands:

I don’t plan to submerge I bought this machine basically for hunting September to January and a little trail riding just to keep the fluids circulating.:yup:

I watch a lot of You Tube to help with my maintenance schedule.:cool:

Hello I’m new in the forum I have a 05 Polaris sportsman EFI 700 I am going to rebuild it using 800 parts can some please help with the parts list I will need to do this project thanks

So, I called my dealership today and asked if my Grizzly needed the update. It does,taking it in this Saturday. I guess they have to pull the head off? What exactly is updated from the old spring to the new? Like to be a little more informed when I drop it off.

By the way I noticed mine is the two push start button as well. Is there a easy fix for that?

Thanks, Troy

I’m new to the forum. So thanks in advance for the help. I have a 2016 Honda Rancher 420 4×4. I recently purchased a Badlands 2500lb winch as well as all of the mounting plates, wiring adapters and fairleads I thought were necessary to install with no drilling or tapping. I also bought an accessory adapter to allow me to tie it into my ignition switch. I got the winch mounted no problem, but now that it’s time to wire it, I notice there is no remote/ignition line coming from the winch, just a red and a negative connected with a solenoid box. Am I supposed to run the red wire straight to the accessory adapter? The instructions just say wire it red and black straight to the battery but I fear that way it will drain the battery. The accessory adapter has 2 separate connections open, a white w/ black stripe and the 2nd connection has two wires to it, a white w/black stripe and a green. Any advice will help. As you can tell I’m quite the novice at this stuff.

Hi new to the forums I was just wondering I can get some help I have an 07 Predator big bore kit 558 Big gun CDI box polished head K and N air filter no lid and a P.P slip on and I live in Missouri and I was wondering how do I go by jet my carburetor I have a stage 1 2 3 Dino jet kit how do you know when got the right jet in there right now I’m currently running 175 and my air mixture screw is three turns out

Well, I have a 98 polaris 500. Last week I drove it about a mile to pickup firewood. Pulled it into the backyard and cut it off. About 30 minutes later, i got back on it to pull it into my shed and she turned over but out of the blue wouldnt start back up.

The first thing i did was get a new spark plug. Nothing. Removed the gas tank and throroughly cleaned the tank and gas lines and put 3 gallons of fresh 93 in her. Still nothing. I then took the carburetor off and soaked it overnight and cleaned it thoroughly. i put the battery on charge overnight just to eliminate that causing any types of problems. When i turn the key on my lights and everything work. But she still wont start or even pull start.

I went and bought an ohm meter and did a resistance test on the spark plug wire with the boot off and got a reading of 5 ohms which ive read was okay. I put the spark plug boot back on and the most I could get it to register was 2.6. This is certainly enough to be a problem, correct?

My 500 is old but shes my baby and im about to go crazy. Any ideas? Id appreciate any help folks.

Sent from my VS415PP using Tapatalk

Have a 2003 Honda 500 and it has what sounds like a knock and a squeal coming from the exhaust
Thinking it may be a bearing that is causing the squeal, but any ideas on the knock ?
I’ve been told timing chain, valves, and piston lol

were do i start, first i had a majour problem trying to get the brakes to work and cost me the price of my right kibney, then i decided to change the spark plug:yikes: well what a experience, the rubber boot was broken so off to get a new one and a new plug , found a socket which was a perfect fit , it just slipped down the tunnell around the plug :moa: then undo and :sad6: the f#### ing would not come out, both the plug and socket stuck , wow , i tried every trick in the book but nothing , tried that hard the end of the socket broke away were the socket extension arm goes in ,:werd:well no choice but to remove the head, big job but have good workshop manual , off to get a new head gasket had to have the thread re done for the plug , and for the first time after putting it back together no parts left over:trink4: so now sort of happy with my handy work , checked every thing and all good then went to start the f#### ing thing and dead, deceased, no life , the starter solinoid sh### t it self , now have to buy a new one , now i have no kidneys left for the next repair job, been in garage now for three months being repaired, one problem after another , will replace the solinoid tonight after i get home , hope it will go hope the timing is correct or it will have to go to polaris and the cost will be sell my first born son, will need riding lessons it;s been so long, one good side to this is that it;s been way to hot to go hunting and now the wet has started if i can get it going i can get out in the cooler weather to hunt.:trink4: