New Trailer to pull behind my Grizzly

I finally finished building this trailer to pull behind my Grizzly. I wanted to use the same wheels and tires so I would have spares if needed when out in the wilds. (click pictures to enlarge)

Attachment 21462

I designed it to have more ground clearance than the Grizz to ensure I could get it over everything. I also wanted it to have springs to reduce the bouncing my old trailer had.

Attachment 21463

I made it slightly narrower than the Grizz to ensure it can get between anything the Grizz can. I also angled the front and back slightly inward so it wont catch on tree’s after I go through and begin to turn. The tongue is removable and it can balance on it’s back end for storage.

Attachment 21464

I had it powder coated matte black to match the color and sheen of the matte black Grizz and then I coated the floor with bedliner to give it grip. I have tie off loops hidden under the frame to give it more flexibility to tie off varying loads.

As a final note I have a set of removable sides to fully enclose the box. They are about 5" taller than the rails to give me more capacity and they can be installed in less than a minute with no tools. Sorry no picture of the sides but I’ll try to get some this weekend.

I’m very please with how it turned out. I will be putting it to the test when I haed out for a camp trip in two weeks.

Attached Thumbnails

New Trailer to pull behind my Grizzly-20150926_184500.jpg
 

New Trailer to pull behind my Grizzly-20150926_184440.jpg
 

New Trailer to pull behind my Grizzly-20150926_184242.jpg
 

New Trailer to pull behind my Grizzly

I finally finished building this trailer to pull behind my Grizzly. I wanted to use the same wheels and tires so I would have spares if needed when out in the wilds. (click pictures to enlarge)

Attachment 21462

I designed it to have more ground clearance than the Grizz to ensure I could get it over everything. I also wanted it to have springs to reduce the bouncing my old trailer had.

Attachment 21463

I made it slightly narrower than the Grizz to ensure it can get between anything the Grizz can. I also angled the front and back slightly inward so it wont catch on tree’s after I go through and begin to turn. The tongue is removable and it can balance on it’s back end for storage.

Attachment 21464

I had it powder coated matte black to match the color and sheen of the matte black Grizz and then I coated the floor with bedliner to give it grip. I have tie off loops hidden under the frame to give it more flexibility to tie off varying loads.

As a final note I have a set of removable sides to fully enclose the box. They are about 5" taller than the rails to give me more capacity and they can be installed in less than a minute with no tools. Sorry no picture of the sides but I’ll try to get some this weekend.

I’m very please with how it turned out. I will be putting it to the test when I haed out for a camp trip in two weeks.

Attached Thumbnails

New Trailer to pull behind my Grizzly-20150926_184500.jpg
 

New Trailer to pull behind my Grizzly-20150926_184440.jpg
 

New Trailer to pull behind my Grizzly-20150926_184242.jpg