my set up in my 09 outlander. newd help with some clutching

ok guys heres my set up. 2009 outlander 800. motor is stock. i have the dual LTE exhaust with a blinky box fuel controller. my afr is 12.5-13 through the entire rpm range. I have 28" tall kenda bear claw htrs. The secondary is a stm with a 40deg helix and looks like a silver spring. The primary is a cv tec with black 1017 spring and 3 2006 pucks and 3 2007 pucks. my engagement is around 2000rpm. from a stand still in high gear with good traction it will rev to 6800 then slowly climb to a max rpm of 7300. Is3 this right or should it go to 7300 and just hold that rpm throughout the acceleration? after 5 or 6 long pulls the primary temp was 195 deg and secondary was 140deg. I ride mostly trails and the odd water hole. not much heavy mud. thanks for any advice[emoji4]

Sent from my SGH-I337M using Tapatalk