Hey guys so I recently replaced the cv boot and trailing arm bushings on the 2007 can am outlander 800. I started it today after I finished up and it started but I had to mess with the key a bit. (Turn it too off and on a few times). I let it warm up for about 5 minutes. I put it in gear and it wouldn’t move. Messed with it for a bit put it in all the gears and revved it and it just acted like it was in neutral. I then shut it off and turn it back on and it ran for about 10 seconds then died. Now when I turn the key there is no power nothing. When I parked it in the garage it shifted fine. I’m stumped any help would be appreciated. :th_smiliefrustrated