i forgot to post about a month ago i changed my coolant with great results.
i decided to do this because we have no idea of the quality or mixture of the stock coolant and i want to know where im at with my bike.
i just pulled the clamp on the lower radiator hose on the throttle side.
make sure you open the fill cap and let drain.
very easy to get at and take off.
after it drains i put the hose back on and filled it SLOWLY with long life coolant…SLOWLY to avoid air pockets as much as you can.
since my 570 is still new there was no need to get the rest of the coolant out of the system and that avoids air pockets and extra bull work.
i used straight concentrate coolant–not the premix 50/50.
let er run and top off..keep an aye on it for a couple rides and your good to go!!
i had to add very little to keep full. no air in system since i didn’t get into it too far,worked great.
coolant is a very important part of keeping you motor cool and running
good. hope this helps someone.
my bike runs great and i dont have heat problems or melting plastic:th_smiliedance: