Make any LED Dual Brightness, Turn Signals etc…

Hey all, here is a quick little schematic I drew up to make your LED’s dual brightness. Day/Night, Turn/Brake and Tail Lights etc.

The resistor doesn’t really need to be 2 watts (1 Watt would be ok) but as cheap as they are I took the safe route.

The 300 ohm value for the Parking light leg worked great for the 60ma LEDS that I chose, I ran 2 in parallel at each location. Feel free to experiment with resistor value for your application.

I bought these LED’s from SuperBright LED’s.

https://www.superbrightleds.com/more…FYI_aQodn9EODA

This is a simple circuit that can be soldered up and encased in heat shrink and used for lots of purposes. Hope it helps some of you out.

Attached Thumbnails

Click image for larger version

Name:	Turn-Signal.png
Views:	N/A
Size:	26.0 KB
ID:	167570