After seeing a few others here LIFT their machines to gain access to grease etc underneath, I got up into the Attic area above my 10′ high garage floor.
I bolted a 2 X 6 and two 2 X 4s across and above two ceiling/roof joists (24" OC) and dropped a HEAVY CHAIN down a hole in the center and attached a large 1/4" (800#) Quick Link to the chain. That LINK is a perfect fit for the HOOK on the winch cable. Backed the quad in, hooked up the winch hook and UP IT WENT. The Buckets etc are a "just in case" and in the pic, there is probably <200 lb ‘resting’ on each side. GREASE JOB tomorrow.
:th_smiliebanana2:
I bolted a 2 X 6 and two 2 X 4s across and above two ceiling/roof joists (24" OC) and dropped a HEAVY CHAIN down a hole in the center and attached a large 1/4" (800#) Quick Link to the chain. That LINK is a perfect fit for the HOOK on the winch cable. Backed the quad in, hooked up the winch hook and UP IT WENT. The Buckets etc are a "just in case" and in the pic, there is probably <200 lb ‘resting’ on each side. GREASE JOB tomorrow.
:th_smiliebanana2:
