Hi..long time lurker, first time poster.
I have a 98 Sportsman 500 4×4 with no spark.
In process of going through the flowchart in the manual for testing the ignition system.
Disconnected the black CDI wire from the panel; still no spark.
Stator: GRN to BLK/R = 0 OHMS (should be around 446)
GRN to R = 1.7 OHMS (should be 3.2)
W to W/R = 108 OHMS (within spec; should be 98ish)
This would tell me the stator needs to be replaced, correct?
I have a 98 Sportsman 500 4×4 with no spark.
In process of going through the flowchart in the manual for testing the ignition system.
Disconnected the black CDI wire from the panel; still no spark.
Stator: GRN to BLK/R = 0 OHMS (should be around 446)
GRN to R = 1.7 OHMS (should be 3.2)
W to W/R = 108 OHMS (within spec; should be 98ish)
This would tell me the stator needs to be replaced, correct?
The next tests are Y to Y/BRN and Y/R to Y/BRN. I can’t locate these wires under the headlight….do I look for these down in the flywheel housing?
Thanks for taking a second to help me out.