hi all, there was a couple guys that wanted to know what i was going to do so here it is. parts: silicone 45 degree elbow 2.75 to 2.25 inches got on ebay for 6 bucks, this part is the key. 1 1/2 to 1 1/2 rubber coupling, 2 inch braided hose, at first i was going to use the braided hose for the whole thing but its too big to get plastic on so i had to go down to 1 1/2 black hose that i had lying around. you need to cut about 1/2 inch off the small end of the elbow and off the 1/12 to 1/12 coupler. put the coupler inside the elbow and then a piece of the braided hose inside the coupler to reduce down to the size you need. the big end of the elbow will slide right on the machine outlet and i put a clamp on it. then run your hose accordingly. hope the pics help and i had to do it this way to get plastic back on right. feel free to ask any questions and i will help
i got all of the stuff at home depot except for the elbow..less than 20 bucks for everything.
i got all of the stuff at home depot except for the elbow..less than 20 bucks for everything.