Bought a pair or LED headlights. I knew I could get them into the high-beam housing easily. The clearance between the low-beam and the shock is tight. I figured I’d test fit one before I bought a second set. I’m pretty sure the bulb will fit once seated, but there’s not enough room to angle the bulb to get it in. Has anyone taken the headlight assembly out? I took the bolt out of the outside corner and the nut from behind on the inboard corner. I applied a considerable amount of force, assuming the rest was snap fittings. Seeing as how the machine is 8 days old, I figured I’d consult you guys before I regretted breaking something. A search here and on YouTube provided no results. Thanks in advance.