Now I have just had my engine rebuilt with carillo rods, cams etc and a load of parts from sparks… including valve springs etc so basically a stage 2 fully built engine.
Also I have a rooster clutch with a sparks non engine braking part and it seems like a sparks clutch weight kit…
Now the thing is because of our style events we have to run 15” wheels and tyres which are quite heavy.. 50lb total combo I think or 22kg… however the tyres are only 27” tall and 8.75” wide so it’s a similar ratio to the standard bighorns
My issue I have is the clutch weighting seems to be wrong and I really need to get some directions to What weight I should add… the rzr is launching really hard but gets to about 35/40 and bounces the limiter and struggles… however… if you feed it in slowly it will reach 65mph gradually…
I believe that I need to add weight to the primary clutch.. .. can anyone suggest what I should add?
I can do a video of the polaris launching and what is happening if it helps..
Here are the weights I have in the box just for reference.. and an image of my 900xp minus the plastics for now!
Any help would be much appreciated guys!
Thanks again!
