Ok so bought this grizzly 450 2007 not running. I orginally thought no spark due to the fact I could spray starter fluid into the intake and not get a response. So I changed spark and tested it on the side of the motor Def getting spark. Still no start. I cleaned the carb and still no start. So I’m thinking either mechanical timing is out or the woodruff key has snapped on the flywheel.

So proceeding on I have the crankcase cover off the pull and examine the woodruff key. Now once I verify that the key is good or bad how would I go about pressing the rotor back on.

Ok so bought this grizzly 450 2007 not running. I orginally thought no spark due to the fact I could spray starter fluid into the intake and not get a response. So I changed spark and tested it on the side of the motor Def getting spark. Still no start. I cleaned the carb and still no start. So I’m thinking either mechanical timing is out or the woodruff key has snapped on the flywheel.

So proceeding on I have the crankcase cover off the pull and examine the woodruff key. Now once I verify that the key is good or bad how would I go about pressing the rotor back on.