First time I took the Grizzly out to a nearby ATV park. I must say that it was quite different (mud/rut) than what I’m used to. Definitely had to take all of the skid plates off and get the mud out of them. I enjoyed it for $20 but thought the trails could of been a little bit better shape. Luckily, the skid plates held up and helped protect the undercarriage. I tried to always stay on the highest ground but sometime the mud was so soft it threw you into the ruts. Overall, I had a great time with some buddies of mine and glad to get a 20 mile run in on the Grizzly. Here are a few pictures and videos!
My first hill climb I got some air because I wasn’t expecting it to have a small ditch right at the top. Then we did a small little mud crossing but had some high water (definitely the highest I’ve gone so far; took forever to get the mud off of my radiator with light water pressure). The rest of the video is pretty basic trails but hope you enjoy.
Only downside is that I cleaned it off yesterday with a warm pressure washer and was very careful where I used the "pressure" mostly I just hit the plastic, wheels, and tires with high pressure to get all the mud off. So I took it outside again today to take the skid plates off and do a little bit more of a clean clean and now when I start it up, smokes comes out of the battery area and also on the lower left side near my foot. I’m going to let it dry over night and fire it up again tomorrow to see if it was just because it was cold and wet. Hopefully, it’s nothing major.
75miles and 9.5 hours
