I have a ’14 1000 and at a ride last weekend it started cutting in and out at full throttle. It starts around 6500 RPM and keeps gaining RPM into high 7000’s but is cutting in and out the whole way. Won’t cut in and out at half throttle or less but anything past that and that’s when it starts First day of the ride it was performing perfectly, then it poured rain that night for an hour or so and my RZR was sitting out as I had already fallen asleep. Next morning got in it to ride around and that is when it started to do this. Figured belt got moisture through intake so loaded up and headed home. Took cover off and was not a single sign of moisture in the clutch. Belt looked fine. Took primary cover off to inspect weights and spider nut and they all look fine. Also I have an Alba clutch kit with no engine braking helix. I have done searches and found a lot of threads where people are having this same issue but they never come back and say what fixed it. My only other thoughts are maybe water in fuel, bad fuel pump, plugs, or something else electrical. Have read a few fuel pump issue threads. Anyone have similar issue and found the problem?
Thanks in advance.