It started acting up last week and I can’t figure out what’s going on.
I rebuilt the carb thinking that would be the easiest solution, but it didn’t help.
I used and oem rebuild kit, although it didn’t appear to need it.
After it sets overnight it’ll start with the choke on with no problem. I’ll run it easy for a second and kill the choke. I’ll continue to ride it easy and it does fine until I down shift. At that point everything goes stupid.
It starts back firing, spuddering, and wanting to die.
I have to pull the choke all the way out in order for it to calm down enough to make it back to the garage. Up shifting does nothing at this point. By the time I make it around the block it acts flooded, and then it won’t start for a while. When it started doing this last week, it was spewing gas from the drain hose on the bottom of the carb. (That’s why I rebuilt the carb)
Today after the rebuild, it didn’t do that, but it’s still doing everything else?
I get that it could be flooded, but then why would it not want to run correctly going down the road unless the choke is pulled all the way out?
Also, I have the throttle screw turned 1.5 turns.
Assuming that’s where it needs to be from watching all the videos. But I can’t get the bike warmed up enough to make any adjustments if needed.
