Anyone have suggestions on a good replacement bearing source for the front spindle bearings on the 03 kodiak 400 4×4. Just bought a machine and both bearings have enough play that even with the quad sitting on ground I can rock the top of the wheels side to side and see the axle "tipping" through the spindle, so I’m assuming those bearings are toasted.

Looking for a good quality sealed replacement bearing if possible.

Also how difficult are these to swap out? I assume they are pressed into the spindle, but how much work is it to get these apart and do they often get stuck to the axles or anything like that? Im probably replacing the lower A-arms at the same time since both have minor bends in them anyway. So part source on that would be great. Thanks!

Anyone have suggestions on a good replacement bearing source for the front spindle bearings on the 03 kodiak 400 4×4. Just bought a machine and both bearings have enough play that even with the quad sitting on ground I can rock the top of the wheels side to side and see the axle "tipping" through the spindle, so I’m assuming those bearings are toasted.

Looking for a good quality sealed replacement bearing if possible.

Also how difficult are these to swap out? I assume they are pressed into the spindle, but how much work is it to get these apart and do they often get stuck to the axles or anything like that? Im probably replacing the lower A-arms at the same time since both have minor bends in them anyway. So part source on that would be great. Thanks!