What up Peeps, I thank you all in advance for any help or suggestions posted. I have an issue with my 2012 Sportsman 850 HO with EPS and could really use some help. First and foremost the quad is a beast and was virtually bullet proof until a few rides ago, GO POLARIS! Anyway almost simultaneously my EPS light started to flicker and a short while later the quad started overheating….(limp mode). I brought it home and cleaned the radiator thoroughly and checked the connections on the battery, this seemed to work for about 20 minutes on the next ride. I have since replaced the battery and installed a new temp sensor. Still the same issues. I looked over the wiring and nothing pops out as a red flag thinking there might be a short somewhere. I used a temp gun the next time it went into limp mode and the engine was running about 180 degrees…Is this the normal running temp? If so, any suggestions as to what this might be? Again any help is really appreciated.