Ok guys I am new to the RZR world. I have a 2013 RZR-S 800. I was reading the owners manual and noticed a section on taking the slack out of throttle pedal. I have to push pedal down almost 3/4 to a 1" before engine starts to rev and start to engage and move machine. I made the adjustment at the throttle body by turning out the adjuster. Not a problem now I only have to push pedal about 1/4". Here is where the problem starts. I took it for a ride and had no issue until I got into the throttle real hard. The motor started running erratic and losing rpm’s then check engine light come on. I limped it home at a idle. RZR ran great before I made throttle linkage adjustment. Could this be a TPS issue? Will the TPS recalibrate and learn the adjustment I made or not? How should I go about fixing this issue? Thanks for any help I can get from you gentlemen. Rick.