I am hoping for a little help by someone smarter than me. On my 500 the little battery indicator is flashing on the speedo. I checked the battery not running and it had 12.6 volts. Running the battery has 14.3 volts. I checked the voltage at the headlights and it has 13.1 volts. So to me that is all good. When I put my speedo in diagnostic mode on the charging page it only shows 2.6 volts. So to me that appears that the diagnostic is not receiving the correct volts everything else has. It starts every time and runs perfect but what would cause the correct voltage to not be getting to the speedo to kick on the indicator. Thanks for all help.