Hi all. My cigarette lighter socket has always been hot without the ignition on. That’s the way it was factory installed. For some reason, it has stopped getting power. I traced and tested the wires (about a foot long) from the socket back as far as they would go to the major harness where it gets lost among all the other wrapped wires. I checked the fuses and they’re good. Why am I not getting power to the socket anymore? This is on an ’04 Outlander 400 Max XT. In the meantime, I’ve connected the socket directly to the battery with a 2 amp inline fuse. I use the socket to power my gps. I’d still rather keep using the original wires if possible….it’s cleaner. Any thoughts/ideas? Thanks.