Hi more issues with my Kodiak 450. Runs great in all gears except reverse. Barely runs/moves. Was fine a week before. Also started overheating not sure if they are related. Would appreciate some ideas thanks

I have a 97 Kodiak 400. I was in the middle of plowing today and I went to start up my Kodiak and the natural light didn’t come on. I checked and the headlights didn’t come on with the key on. I tried to start it but it didn’t start. I got it started by crossing the starter solenoid wires. When running the reverse light is always on. What would cause this to happen? Any help is greatly appreciated.

Sent from my SM-G928R4 using Tapatalk

I have a 97 Kodiak 400. I was in the middle of plowing today and I went to start up my Kodiak and the natural light didn’t come on. I checked and the headlights didn’t come on with the key on. I tried to start it but it didn’t start. I got it started by crossing the starter solenoid wires. When running the reverse light is always on. What would cause this to happen? Any help is greatly appreciated.

Sent from my SM-G928R4 using Tapatalk

Does anyone have any first hand knowledge about Interco Swamp Lite 26×9-12 and 26×10-12 ATV Tires? I want to run these on my 2016 Kodiak 700 in place of the 25 inch Maxis stock tires. I don’t think clearance will be a issue, but I will be putting on a 2 inch lift at the same time, also 1 inch wheel spacers. Any thoughts will be greatly appreciated.
:getrdone:

Attached Thumbnails

 

Does anyone have any first hand knowledge about Interco Swamp Lite 26×9-12 and 26×10-12 ATV Tires? I want to run these on my 2016 Kodiak 700 in place of the 25 inch Maxis stock tires. I don’t think clearance will be a issue, but I will be putting on a 2 inch lift at the same time, also 1 inch wheel spacers. Any thoughts will be greatly appreciated.
:getrdone:

Attached Thumbnails

 

Does anyone have any first hand knowledge about Interco Swamp Lite 26×9-12 and 26×10-12 ATV Tires? I want to run these on my 2016 Kodiak 700 in place of the 25 inch Maxis stock tires. I don’t think clearance will be a issue, but I will be putting on a 2 inch lift at the same time, also 1 inch wheel spacers. Any thoughts will be greatly appreciated.
:getrdone:

Attached Thumbnails

 

Hi everyone need help with a 04 Kodiak 450 I picked it up for $30 and did some trading to get all the parts I needed but its hard to spin the motor the starter really just clicks replaced it twice haven’t changed the starter yet battery working on all the other wheelers I have and tried 2 other battery’s same thing I took the plug out and it spins free kinda hard still but it spins check the valves and adjusted them twice checked timmi check timing looks off by one tooth I don’t know what the issue is kind of lost has anyone else had this problem

Hi everyone need help with a 04 Kodiak 450 I picked it up for $30 and did some trading to get all the parts I needed but its hard to spin the motor the starter really just clicks replaced it twice haven’t changed the starter yet battery working on all the other wheelers I have and tried 2 other battery’s same thing I took the plug out and it spins free kinda hard still but it spins check the valves and adjusted them twice checked timmi check timing looks off by one tooth I don’t know what the issue is kind of lost has anyone else had this problem

Hi everyone need help with a 04 Kodiak 450 I picked it up for $30 and did some trading to get all the parts I needed but its hard to spin the motor the starter really just clicks replaced it twice haven’t changed the starter yet battery working on all the other wheelers I have and tried 2 other battery’s same thing I took the plug out and it spins free kinda hard still but it spins check the valves and adjusted them twice checked timmi check timing looks off by one tooth I don’t know what the issue is kind of lost has anyone else had this problem

Hello,
I will be taking delivery of a 2016 Kodiak SE Friday as well as a warn 2000 winch and moose county 60" snow plow. I plan on installing these friday evening. Can anyone give me some insight on the best place to splice in for the winch power? Will I need to remove any plastic to access wiring? Installing the other accessories doesn’t look too bad. I am just worried about the wiring portion of the install.
Thanks
Jon