Category Archives: Wheels and Tires

Good all around mx tire

Looking for a good all around mx tire for racing next year. It’s pretty loamy at the mx tracks here. Soft sand. So I was thinking probably bighorns or rocktanes. But should I stay with the stock 27" size tire or go a hair bigger or even to a 26". It’s gonna be all about speed obviously. So lighter the better!

DWT Red Label Wheels

I have a set of 12×8 DWT red Label wheels that I purchased for my 2015 Rzr 900 Trail, the holes are 10mm, I can drill them out to work on my 12mm wheel studs. However if I do this will they only work on 12mm studs(the holes are not tapered)? Do the wheel holes keep the wheel straight or the ears on the hubs? The reason I ask is I also have a Ace 570 that I would like to use these wheels on also.

Have Any Of You Done This?

I have been struggling with an issue for a while and I think I have the solution. I cant really afford to get a set of wheels and new tires right now, but I want to go to the same width front and rear.

I am thinking of getting a set of wheels (7" wide) and two new rear Bighorns (29/11-14). That way I will have the same width tires and wheels for now and I can research more on the next tires to go to, after the bighorns wear out.

Have you or anyone you know run the stock rears all the way around? Pictures are worth a thousand words!

Please post opinions and pics of 15″ Wheels Mounted on XP1K

I’m debating getting 15" wheels instead of 14" wheels for my new XPT. I’m leaning towards the STI HD5 Wheel. I had 14" on wheel on my 900XP with a 28" tire. For my new machine I’m going to go with a 30" tire so I’m thinking I may be able to get away with a 15" wheel as the ratio would be similar to the 14X28 from my last set up?

Any pictures and feedback is appreciated!

Wanta put 29.5 outlaws on 800s

I got a deal on some outlaws 29.5 X 9 X 12 front and 29.5 X 12 X 12 rears will these tires fit my 2012 RZR 800s with no lift already have 2" spacers on all four corners now.
I’ve used these tires before on my ATV’s and the are great mud tires so I would like to try them on my RZR I ride in muddy conditions and swampy areas 40% of the time and woods with dead falls or dirt/paved roads the rest of the time.
Questions is will they work without rubbing, binding, or hitting something on my RZR without a lift ???
I plan to install a Dalton clutch kit if they work…I currently have Big Horns 26" on now and they just don’t do it for me I’ve been stuck in swampy mud twice this year and had to use my winch to get out.
Anyone have photos of outlaws on a 800s ???
I have put 30" tire up along side my bike and they appear to clear but I’m concerned about real world riding with them and hard cornering any input will be helpful before I try installing them