Where is the best place to get clutch parts. I need the rollers that go on the spider and the spacer washers

What is the best bang for the buck for a 2 or 3 in lift kit for a rzr 900xp 2012.. And where to get it?

I’m sure this has been done some where on here but I searched and couldn’t find somthin. I have some rzr 1000 seats I’m wanting to put in my 900 and wanting to know how to do it also 8 possible I’d like to lower them a little thanks in advance

I have a 2013 xp 900 and it seems to be running hotter then usual. It has always stayed around 195-197. Yesterdays ride it was running 203. I just changed the oil and air filter so this is the first ride on the new oil. It would get to 203, the fan would come on and it would cool down to 188 then back up to 194, stay that way for a short time then back to 203. Its never done that. Kind of worried about that. Im not very mechanical but if anyone has a idea of what I can check please let me know.

I have a 2013 xp 900 and it seems to be running hotter then usual. It has always stayed around 195-197. Yesterdays ride it was running 203. I just changed the oil and air filter so this is the first ride on the new oil. It would get to 203, the fan would come on and it would cool down to 188 then back up to 194, stay that way for a short time then back to 203. Its never done that. Kind of worried about that. Im not very mechanical but if anyone has a idea of what I can check please let me know.

I’m in the market for control arms cause in the near future i want to upgrade to either 30 or 32 inch roctanes. Looking at both the the s3 set and the special carriers mfg. I like that the s3 set uses all stock hardware so replacements as far as ball joints and bushings are readily available. But at the same time i like the heim joint style setup that special carriers offers that allows easy camber adjustments and what seems to me to be a strength increase over stock. I’m just not to sure about their proprietary spindle pin that they use in place of the stock ball joint. So which would you choose guys and why also if i were to go with the special carriers set i think it would be a good idea to buy a extra set of spindles to keep on hand i would hate to have a weekend ruined over one small part.

Anyone know of a 4-point harness made for kids? The pro armour, pro, crow all seem to be too wide at 2-3", the straps are almost too wide for their shoulders.

There’s got to be something out there, any help appreciated!

I have a 2011 RZR 900XP that has an ignition problem. I thought it could be the ECU so I bought a new one from RockymountainATV.com

Does a new ECU need to be flashed to work properly?

The old one did not have an error code. The new one has an error code (520 194 3) Neither help with the spark issue.

Thanks!!

Anybody body have experience with this radius rods? I like them but they are more expensive than most others.

I just installed a 5" lift on my rzr and the instructions said that I needed to turn my shocks up to achieve the full 5 inches. I was wondering if yall could tell me how to turn up my shocks. thank you.