Not only is it important to have the correct harnesses for your RZR but to have the correct attachment point for those harnesses. The Dragonfire Racing harness and anchor kit position the front harnesses in such a way that when used with the stock seats wont slip off your shoulders. What good is a harness if it doesn’t stay where it needs to be. The Rear harness bar lowers the attachment point for the harnesses below the passengers shoulders so the harness wraps around your shoulders providing more holding power than if the harness were coming from a high position.
Kit Includes:
Qty 4 4 Point 3" Harnesses, Any color (Dragonfire Racing or Pro Armor, your choice)
Qty 2 Front Harness Anchors (Corrects the position of the driver and passengers harness to keep the should straps on your shoulders.
Qty 1 Rear Harness Bar (corrects the attachment angle of the harness and positions the harness below the passengers shoulders where it should be.
Almost Finished! 2015 Rzr XP 1000 4
Heres where im at with it right now and the rest should be wrapped up in a week or so.
8" S3 Lift
4" GDP Portal’s
300M Ball Joints
40x10x20 Super ATV Intimidators
20" American Force Wheel’s From 3P OffRoad "Direct Bolt On"
Polaris Door Insert’s
Graphic Kit "eBay" Front fender graphic missing but on the way
2" Recievers Front and Rear With Power Leads Ran For Winch
Ramsey REP5000 With Wireless Remote
Rogue offroad cage
Rogue offroad side steps
Right now its at a reputable audio shop that specalizes in audio for SxS’s
All Terrain Audio in Bullard Tx "On Facebook" He has built a couple tops for me and some of my friends and VERY Happy customer. I dont know if any of yall have seen the LSU can am commander with more audio than you could haul in a cargo ship but hes the mastermind behind that beast… JS
He is building a flush mount top with a full length moonroof and painted to match, the moonroof will have ‘Intimidator" etched into the Lexon and will illuminate as well as a windshile that will illuminate.
Audio is all WetSounds and consist of:
8x 6.5’s the stronger of the two models wetsounds offers XS-650 RGB
2x 10” Subs
2x Rev8’s
2x Amps not sure which ones yet
Double Din Touchscreen in phone box area under speedo with backup camera
Underglow lighting
work lights in each corner if needed
illuminated headlights
grill lighting
30" rogue4 on front and 6" on rear
Ill Post some pics and theres a long story as to why i went this far with a rzr to so keep that in mind when you picture me as a fucktard lol but maybe i am a little but when a man sets his mind to something not much can stop trying to acheive his goal lmao.
I’m thinking about shipping my shocks to shock therapy and was wandering if anyone knows the weight of all 4 shocks? Just trying to get a number so I know how much to budget. Or if someone has shipped them form Oregon? Around the Salem area. By the way it’s a 2014 4 seater if that makes a differences. Thanks Roy
sooo…. bought the 2016 4 seater and have had nothing but problems with the clutch !!! anytime u bind the bike up at example I pull up to my 6×14 and it doest have a gate and butt the tires up to it and ease on the gas to load on trailer the belts starts slipping and burns up my belt !! I have 30 inch roctanes which is only little bigger and it looks to me after that I took cover off and the smoke from belt with cover off looks like its coming from secondary !! Took to the dealer about this 4 times and still not fixed . Anybody else had a issue like this with either the primary or secondary ??? any info will be helpful thanks
Hey guys getting ready to load the rzr into the trailer and decided to take her for a rip around the block before loading and luckily I did. When I went to stop behind my trailer the car stalled like a manual clutch vehicle would if you did t pull the clutch in when coming to a stop. So I fired it back up and went to put it in reverse and it jumped and died again. So I knew something was wrong so I pulled the clutch cover and the primary was stuck closed so I start looking and one of the weight arms is jammed into the spider. So I start disassembling and find the problem. There is a roller in the spider that the weighted arm rubs on when the clutch engages and keeps the arm from extending to far(causing the arm to stick into the spider and damage it like mine did.) anyways my roller is flat spotted and let the arm go to far. You cannot buy the roller and the arm scared the inside of the spider. $600 for a new primary and the cost to overnight it since no one in my area has one. (By they way anyone have a coupon code for Rocky Mountain). Anyone have this problem? I mainly want to know what caused this so I can prevent it from happening again. It’s not cheap to let it happen more than once.
Hey guys getting ready to load the rzr into the trailer and decided to take her for a rip around the block before loading and luckily I did. When I went to stop behind my trailer the car stalled like a manual clutch vehicle would if you did t pull the clutch in when coming to a stop. So I fired it back up and went to put it in reverse and it jumped and died again. So I knew something was wrong so I pulled the clutch cover and the primary was stuck closed so I start looking and one of the weight arms is jammed into the spider. So I start disassembling and find the problem. There is a roller in the spider that the weighted arm rubs on when the clutch engages and keeps the arm from extending to far(causing the arm to stick into the spider and damage it like mine did.) anyways my roller is flat spotted and let the arm go to far. You cannot buy the roller and the arm scared the inside of the spider. $600 for a new primary and the cost to overnight it since no one in my area has one. (By they way anyone have a coupon code for Rocky Mountain). Anyone have this problem? I mainly want to know what caused this so I can prevent it from happening again. It’s not cheap to let it happen more than once.
So I bought one of those Amazon light bars for my RZR. I have the SDR cage and roof. I also bought those adjustable mounts from Amazon. I have about $150 into the entire deal… I have to say everything looks good and fits nice. Yesterday I mounted the bar but didn’t wire it to the switch yet. I did put power to the bar just to see it turn on.
Here is my question, would you guys just zip tie the wire to the cage, or would you drill a hole and fish it? Would love to post a pic, but for some reason I can’t.
Thanks ahead of time for any information. I have a 2014 XP4 1000
I am trying to install The Twisted Stitch Vortex rear bench in my RZR. The install has been difficult since it came with no instructions and its hard to get someone on the phone at Twisted Stitch. I think i have everything installed except the rear plate that goes above the seatbelt mounts. I cannot get the plate to sit flush against the mounting bracket because the seat belt mounts are in the way. It seems I either have the wrong plate or need to do something to modify the seatbelt mounts. Does anyone have any pictures or info about how this plate gets mounted? http://s1377.photobucket.com/user/ccale11/library/