I was thinking of getting the pelican 35qt cooler but not sure if it will fit. I’ve seen people are putting the Yeti 35qt with the dewalt tool box and was wondering if the pelican will fit the same.
Thanks

Hey everyone, bad luck struck again. Long story short went into a mud hole that I thought I could see the bottom. Turns out I was wrong and there was a large log buried in it. Went straight into my control arms and as I was getting winched out busted the lower control arm, separated the upper ball joint and bent the steering rack. 8 hours later and its finally unstuck and on the trailer to go home.

So far it looks like the front diff is ok and the upper a arm is alright.
Lower control arms broke right at the weld and drain. Considered trying to get it warrantied but I highly doubt anything would be covered. Also looking into the extended warranty to see if it would cover next time.

So my problem is… I have no clue what the number for the lower control arm is. it is a 2015 Voodoo blue model. The control arm is silver. I have been looking at the parts diagrams and there is a VB model but I am not sure if that is silver or a blue. Any help would be appreciated. Thank again!

Pictures aren’t uploading…

Hey everyone, bad luck struck again. Long story short went into a mud hole that I thought I could see the bottom. Turns out I was wrong and there was a large log buried in it. Went straight into my control arms and as I was getting winched out busted the lower control arm, separated the upper ball joint and bent the steering rack. 8 hours later and its finally unstuck and on the trailer to go home.

So far it looks like the front diff is ok and the upper a arm is alright.
Lower control arms broke right at the weld and drain. Considered trying to get it warrantied but I highly doubt anything would be covered. Also looking into the extended warranty to see if it would cover next time.

So my problem is… I have no clue what the number for the lower control arm is. it is a 2015 Voodoo blue model. The control arm is silver. I have been looking at the parts diagrams and there is a VB model but I am not sure if that is silver or a blue. Any help would be appreciated. Thank again!

Pictures aren’t uploading…

Hello my Rzr friends

I’m an older rider that has a lot of time in the woods,

I’ve had a lot of bikes and sport atv’s but when the Rzr-s came out I bought one to start taking my young grandsons with me, great machine,loved it, then came the rzr900xp, I waited to let them get the bugs out, then in 2012 bought a new 2013,
Still love it,ride all over the country,and ride often, 20 to 30 rides a year!

Now I’m thinking about buying a new 2015 rzr1000

I’ve watched the YouTube videos, and my biggest concern is it appears to have a lot of body role and twos in the turns under the throttle ?

I do know the technique to compensate for that ,but I road sport and racing atvs
For years, when I went to the 660 raptor it had a high center of gravity
Compared to the other bikes I had owned, yeah I learned to control it,
But it was top heavy,

Should have told you I’m from middle Tennessee where we are blessed with lots of choices for riding with in a few hrs, even with in an hr!
Lots of tough technical trails for a rider of 46 years!

Tell me your thoughts first and then your list of top accessories you have installed and enjoyed ,brand names or cons of the Rzr or accessories!
Thx my friends!

Hello my Rzr friends

I’m an older rider that has a lot of time in the woods,

I’ve had a lot of bikes and sport atv’s but when the Rzr-s came out I bought one to start taking my young grandsons with me, great machine,loved it, then came the rzr900xp, I waited to let them get the bugs out, then in 2012 bought a new 2013,
Still love it,ride all over the country,and ride often, 20 to 30 rides a year!

Now I’m thinking about buying a new 2015 rzr1000

I’ve watched the YouTube videos, and my biggest concern is it appears to have a lot of body role and twos in the turns under the throttle ?

I do know the technique to compensate for that ,but I road sport and racing atvs
For years, when I went to the 660 raptor it had a high center of gravity
Compared to the other bikes I had owned, yeah I learned to control it,
But it was top heavy,

Should have told you I’m from middle Tennessee where we are blessed with lots of choices for riding with in a few hrs, even with in an hr!
Lots of tough technical trails for a rider of 46 years!

Tell me your thoughts first and then your list of top accessories you have installed and enjoyed ,brand names or cons of the Rzr or accessories!
Thx my friends!

So I was wondering if anyone could help me out. I have a 15 XP 1000 with only 45 miles on it. I blew a belt and after I replaced it I now have another problem. The RZR sounds kinda funny, has less then 1/2 the power it should, if you run it for a mile or 2 the muffler will get red hot (melting plastics hot) and is showing code 520344 with a 17 below it.

I pulled the spark arrester to see if there was any muffler packing, but it was clear. The dealer is telling me there are booking 2 weeks out before they can look at it. Anyone have any ideas?

Thanks, Darrin

So I was wondering if anyone could help me out. I have a 15 XP 1000 with only 45 miles on it. I blew a belt and after I replaced it I now have another problem. The RZR sounds kinda funny, has less then 1/2 the power it should, if you run it for a mile or 2 the muffler will get red hot (melting plastics hot) and is showing code 520344 with a 17 below it.

I pulled the spark arrester to see if there was any muffler packing, but it was clear. The dealer is telling me there are booking 2 weeks out before they can look at it. Anyone have any ideas?

Thanks, Darrin

I did search and didn’t find anything like this. I was riding today and my check engine came on and the power stearing light as well, no power steering. That’s pretty common from what I read but here’s where it gets a little strange to me. The info center in the speedo also quit working. Nothing, no rpm’s,no temp,no voltage reading nothing. Also about 5 minutes after that my bully dog started saying initializing communication but could never complete the comunication. I turned it off on back on several times but still the same issue and actually the bully dog wouldn’t even come on a few of those times. I’m think voltage regulated as I know this is a common problem but the info center isn’t working for me to check the voltage. Any ideas?

I did search and didn’t find anything like this. I was riding today and my check engine came on and the power stearing light as well, no power steering. That’s pretty common from what I read but here’s where it gets a little strange to me. The info center in the speedo also quit working. Nothing, no rpm’s,no temp,no voltage reading nothing. Also about 5 minutes after that my bully dog started saying initializing communication but could never complete the comunication. I turned it off on back on several times but still the same issue and actually the bully dog wouldn’t even come on a few of those times. I’m think voltage regulated as I know this is a common problem but the info center isn’t working for me to check the voltage. Any ideas?

So, went to busco this weekend and run the drag strip a few too many times.
The Terms dug a little to well I guess. Where are yall getting replacement axles from. I could put my stock tires back on, load up, miss work to go to the dealership, but its not worth my time. thanks guys!